Máy hủy tài liệu MSHT-i - Matsui Vietnam

" iplas " is the name for a group of intelligent products developed by MATSUI with self-control functionality. Products equipped with " iplas " operating to its original power of 9-31% while maintaining a high performance ratio. It is a energy-saving, low-noises, and compact smart shredder.

1. Equipped with energy-saving system drive!

● With i plas: In the conventional energy-saving operation is now possible with a small motor that could not be.; Senses the load during operation, self-judgment function was added to help one another while the motor of the machine 2, the driving force and crushing capacity can be optimized operation.
● Energy-saving effect: If one were crushed to 1 minute gas tank, to achieve up to 92% reduction rate of conventional electricity (4.4kW) motor 2 machine 2.2kW.; Energy-saving operation function is activated when idling and no load sensing, to achieve up to 96% electric rate reduction.

2. Load sampling function

Sampling crushing load, equipped with the ability to self-determine whether or not material can be crushed.

3. Space saving

W1510×D1980×2100 Weight: 2050kg

4. The most suitable cutter design

Advanced knife design emphasizes cutting performance while reducing cutter loads.

5. Quiet operation

Average Noise Levels: 82~87dB
Wedge Cutter Design means low noise levels.

6. High reliability

State of the art machine design results in high mechanical rigidity. Even cooled and hardened products can be ground without trouble.

Hiện nay chúng tôi đang là đại lý hãng Matsui tại Việt Nam :

Shredder for fuel tank and drum MSHT-i

Gravimetric type blender JCW2-i

Mold Chiller System MCC5-i

Gravimetric type blender JCW2

Gravimetric type blender JCW2-i

Gravimetric loss in weight type blender JCS

Volumetric Type Blender JC3

Quick Heat & Cool Mold Controller RHCM

Mold Temperature Controller High Temperature type MCHH

Thermal Conduction Vacuum Dryer (Air parge type) DPD3.1

Air-cooled Closed Circuit Water Cooling System Ecobrid

Máy sấy khô

Băng tải

Bộ điều khiển nhiệt độ

Khuôn phôi PET

Volumetric type blender JCT-PP

Volumetric type blender JCT-SS

Volumetric type blender JSV

Matsui Vietnam	Water Tank For GMCL-25A
Matsui Vietnam	Water Tank For GMCL-55A
Matsui Vietnam	MVH-3 with E2K sensor attached
	φ38
Matsui Vietnam	Drying Filter For
	MJ3-25, MXF-16SP-G1
Matsui Vietnam	Conveying Filter For
	MJ3-25, MXF-16SP-G1
Matsui Vietnam	Drying Filter For
	MJ3-75, NO847-BS250
Matsui Vietnam	Conveying Filter For
	MJ3-75, MXF-16SP-G1
Matsui Vietnam	CMCL-88A
	Correct: GMCL-88A
Matsui Vietnam	Model: GMCH-25A
	Description : Standard set, No hose included, 200V, 50Hz, 3P
	Weight: 50 kg / pcs
Matsui Vietnam	MJ3-25A
	200V, 3P, 50Hz
	Including the following:
	– Suction Nozzle, f38,
	– Signal wire, 5m
	– JC-3 & MVH-3
	– PVC & GL hose, 20m each
	– Dust collecting cyclone

Matsui Vietnam	MJ3-50A
	200V, 3P, 50Hz
	Including the following:
	– Suction Nozzle, f38,
	– Signal wire, 5m
Matsui Vietnam	– JC-3 & MVH-3
	– PVC & GL hose, 20m each
	– Dust collecting cyclone

	Item: Dehumidifying Dryer
Matsui Vietnam	Model: MJ3-300A
	Include:
	Dust collecting cyclone
Matsui Vietnam	JC-18
	MVH-18
	PVC hose, 20m
	GL hose, 20m
	fi50 suction nozzle

Matsui Vietnam	Code: JCT-102SS-J
	Includes JC-6 x 2 sets
	Excludes level switch, alarm light
	and buzzer
	Weight: 63 kg

Matsui Vietnam	SMGL-050A
	Correct: SMGL-50A
	SMGL-50A
	200V, 50Hz, 3P
	Includes KKB-38 and Ø38 suction nozzle
	Weight: 50 kg
	Dimension: 53x39x93 cm

Matsui Vietnam	Code: MJ3-25A
	200V, 3P, 50Hz
	Including the following: Suction Nozzle, f38, Signal wire, 5m JC-3 & MVH-3PVC & GL hose, 20m each
	Dust collecting cyclone
	Weight: 223 kg

Matsui Vietnam	Item : Mechanical Seal for MCH-55-J/MCH-55-J-OP
	Model: 20685

Matsui Vietnam	Item: Honeycomb For APD-80N ( S/No: 00045, Feb 2001 )
	Weight: 15 kg / pcs

Matsui Vietnam	Water Tank For GMCL-25A
Matsui Vietnam
	Water Tank For GMCL-55A

Matsui Vietnam	MVH-3 with E2K sensor attached
	φ38

Matsui Vietnam	Drying Filter For
	MJ3-25, MXF-16SP-G1

Matsui Vietnam	Conveying Filter For
	MJ3-25, MXF-16SP-G1

Matsui Vietnam	Drying Filter For
	MJ3-75, NO847-BS250

Matsui Vietnam	Conveying Filter For
	MJ3-75, MXF-16SP-G1

Matsui Vietnam	CMCL-88A
	Correct: GMCL-88A

Matsui Vietnam	Model: GMCH-25A
	Description : Standard set, No hose included, 200V, 50Hz, 3P
	Weight: 50 kg / pcs